Question

1. if the scale on the site plan reads scale: 1\ = 20 then every ________.a. 1/20 of an inch on the drawing represents 20 feet, 0 inches.b. 20 inches on the drawing represents 1 foot, 0 inches.c. inches on the drawing represent 20 feet, 0 inches.d. 20 inches on the drawing represents 20 feet, 0 inches.7. an engineer scale is set up multiples of ______.a. 5b. 10c. 39.37d. 128. which type of plan shows the layout of the hvac system?a. plumbing.b. structural.c. mechanical.d. foundation.9. electrical plans include________.a. exterior elevations.b. section drawings.c. plumbing isometrics.d. lighting plans.10. when a plan is marked nts, the dimensions are measured on the drawing cannoused to build the project.a. trueb. false

Explanation:

• Question 6: The scale \(1'' = 20'\) means that each inch on the drawing represents 20 feet in real - life.
• Question 7: Engineer scales are typically set up in multiples of 10.
• Question 8: Mechanical plans show the layout of HVAC (Heating, Ventilation, and Air Conditioning) systems.
• Question 9: Electrical plans include lighting plans.
• Question 10: When a plan is marked NTS (Not To Scale), the dimensions measured on the drawing cannot be used to build the project.

Answer:

1. C. Inches on the drawing represent 20 feet, 0 inches.
2. B. 10
3. C. Mechanical.
4. D. Lighting plans.
5. A. TRUE