Question

support structures
use the information below to answer the question.
need
a support structure is not needed with powder - based printing, such as sls sand or polymer. however, with metal printing, a support will be needed to control the warpage and to dissipate heat into the build plate.
most slicing programs for fused filament fabrication (fff) will have an option to automatically add support. support can also be added manually to any spot that needs more.
with sla, the considerations differ depending on whether the printer is a bottom - up or top - down machine. there are also choices as to how the support material is created.
removal
a support structure can be removed by sanding, vapor smoothing (with abs filament), or using a grinder for direct metal laser sintering (dmls).
fff and material jetting can use dissolvable support structures as well. an fff machine will need two spools - one for the buildmaterial and one for the support material. with materialjetting, therewill be two bins.with fff, there are differentways the filament can be dissolved,depending on the typeof filament.one uses achemical process;the other uses water,which is probably safer.
in terms of fused filament fabrication (fff), what are the two ways to dissolve the support structure?
a heat treatment or sunlight
a uv light or air pressure
a chemical process using water
an electrical current or freezing

Explanation:

The text mentions that for FFF, there are different ways the filament (support structure) can be dissolved. It specifically states one is a chemical process and the other uses water.

Answer:

a chemical process using water