Question

1. which of the following is not one of the procedures to follow when changing the oil in an automotive engine? (a) warm up the engine. (b) place a catch pan under the oil drain plug. (c) wipe some clean oil on the o - ring and install the new filter. (d) using an oil filter wrench, screw the new filter on. 8. when changing the fluid and filter in an automatic transmission, you should (a) warm the engine and transmission (b) position the new pan gasket using an approved sealer (c) start all the pan bolts with your fingers (d) all of the above. 9. the gear selector should be in __ when checking the fluid level in an automatic transmission or transaxle. 10. when checking a manual transmissions fluid level, warm fluid should be even with the . 11. where is the fill plug normally located on an automotive differential? 12. why should engine coolant be changed periodically? 13. power steering fluid level (a) should be checked regularly (b) should be checked with the engine off (c) can be checked on some vehicles by removing a dipstick from the power steering pump (d) all of the above. 14. the fluid level in an automotive master cylinder should be checked (a) every other year (b) every other month (c) at least twice a year (d) none of the above. 15. some manual transmission clutches use a(n) __ system to disengage the clutch. 16. how do you check the manual steering fluid level?

Explanation:

Answer:

1. D. Using an oil filter wrench, screw the new filter on
2. D. All of the above
3. Park
4. Fill plug opening
5. On the side of the differential housing at approximately the mid - height
6. To prevent corrosion, deposits, and maintain proper cooling efficiency
7. D. All of the above
8. C. at least twice a year
9. Hydraulic
10. Check the fluid level in the reservoir (usually has a minimum and maximum mark)