Question

arrange the following steps of the soldering process in the correct order. start order let the solder cool naturally apply solder to the heated joint clean the metal surfaces apply flux heat the joint with the soldering iron end order

Explanation:

The correct order of the soldering process steps is based on standard soldering procedures. First, metal surfaces must be clean for proper bonding (clean the metal surfaces). Then, flux is applied to prevent oxidation (apply flux). Next, the joint is heated with a soldering iron (heat the joint with the soldering iron). After heating, solder is applied to the heated joint (apply solder to the heated joint). Finally, the solder is allowed to cool naturally (let the solder cool naturally).

Answer:

1. clean the metal surfaces
2. apply flux
3. heat the joint with the soldering iron
4. apply solder to the heated joint
5. let the solder cool naturally