Question

fill in the blanks:

everyday maintenance for shears involves soaking a soft cloth or towel with blank, wiping the blades after every client, and soaking them completely in blank. when balancing your shears, lift the ring finger to open the blades blank, then let the ring-finger handle go. the blades should close blank. for weekly cleaning and lubrication, carefully open shears blank.

word bank: at a 90-degree angle, halfway, shear oil, epa-registered disinfectant, two-thirds of the way

Explanation:

Analyze everyday shear maintenance

Using the Cosmetology Sanitation knowledge point, everyday maintenance of professional shears requires cleaning and disinfecting to prevent cross-contamination. According to standard cosmetology guidelines, hair and debris are wiped from the blades using a soft cloth or towel saturated with shear oil to clean and lubricate them. After cleaning, the blades must be disinfected. This is achieved by completely immersing or soaking the shears in an EPA-registered disinfectant for the manufacturer's specified contact time (typically 10 minutes) after every client.

Analyze shear tension balancing

To test and balance the tension of your shears, hold them vertically. Lift the ring-finger handle to open the blades two-thirds of the way, then let the ring-finger handle go. If the tension is correct, the blades should close halfway (or slightly more, but not completely shut). If they close all the way, the tension is too loose; if they do not close at all, the tension is too tight.

Analyze weekly cleaning and lubrication

For weekly deep cleaning and lubrication, you must open the shears at a 90-degree angle to expose the pivot area. This allows you to thoroughly clean out any hair, dirt, or debris trapped in the joint and apply a drop of shear oil directly to the pivot screw.

Answer:

Fill in the blanks:

Everyday maintenance for shears involves soaking a soft cloth or towel with <blank>shear oil</blank>, wiping the blades after every client, and soaking them completely in <blank>EPA-registered disinfectant</blank>. When balancing your shears, lift the ring-finger to open the blades <blank>two-thirds of the way</blank>, then let the ring-finger handle go. The blades should close <blank>halfway</blank>. For weekly cleaning and lubrication, carefully open shears <blank>at a 90-degree angle</blank>.